Click here for FAQ about the Z-Series SpectraGen Character Generator

Question: Are the SGe, SG3 and SG4 Character Generators compliant for the year 2000?
Answer:  Sorry, All versions of SGe, SG3 and SG4 Character Generators are not compliant for the year 2000. The functions of the character generator will still be operable, however the only problem that will occur is that the year will roll over to 1900. Currently, there are no plans to modify the operating code of these models to accommodate the year 2000 and beyond. Reasons are due to the obsolescence of components.

Question: Do you sell any character generator that is compliant for the year 2000?
Answer:  Yes, Our new version of character generator products are year 2000 compliant. The new versions are the Z-Series SpectraGen Character Generators. If you have any questions on our new line of character generators please give us a call or email us.

Question:  How can I change my clock and date on the SGe Character Generator?
Answer:  To chbr>Answer:  To change the clock and date settings on the SGe Character Generator press <F3>, then press <C> for Clock Set.  Using the <SPACE BAR> and <ENTER> keys, change the clock and date. Note: To have an accurate time, set the seconds ahead (about 10) and once the <ENTER> key is pressed after the STOP PAGE, the seconds will begin to run.

Question:  How can I change my clock and date on the SG3/4 Character Generator?
Answer:  To change the clock and date settings on the SG3/4 Character Generator press <EDIT>, then press <CTRL> + <SET CLK>. Using the <SPACE BAR> and <ENTER> keys, change the clock and date.
                Note: To have an accurate time, set the seconds ahead (about 10) and once the <ENTER> key is pressed after the STOP PAGE, the seconds will begin to run .

Question:  What are Regions?
Answer: Regions are sections divided on the screen for display. Each region has assigned lines which can be adjusted..   The total lines for all regions must be 26. The default setting for the SGe, SG3/4 and SpectraGen Z-Series Character Generators is 4 regions. For example, the title region (the very top section) is known as Region 1. The region below Region 1 is Region 2, this is used for the clock and date. The region below Region 2 is Region 3, this is used for your main text. The region below that is Region 4, this is used for crawling information. There are a total of 6 regions that can be used. Remember, each region size can be adjusted by changing the amount of lines. To do this press <EDIT>, <SET CHAN>. Edit each region by changing the number of lines. The total lines mustequal to 26. Press <ENTER> repeatedly to exit the menu and save the settings .

Question:  How do I set my SGe Character Generator to use EVENTS?
Answer:  Before scheduling Events for the character generator, the EVENTS function must be enabled. To enable EVENTS, press <F4>, and select <C> for Channel Region Setup. Located on EVENTS press <Y> for yes.

Question:&nbsze=2>Question:  What type of modems can I use on the SG3/4 Character Generators?
Answer:  The modems tested with these character generators are the Universal Data Systems 212A, Universal Data Systems 212ALP and the US Robotics Sportster FaxModems.
              Note: The older character generators were designed to work with "dumb" modems (i.e. UDS 212A/ALP). Since 
the UDS modems can no longer be found the US Robotics Sportster FaxModems with switches has been approved as a substitute, however the Sportster modems can only be used on the answer site, a "dumb" modem must still be used on the originating site. The US Robotics Sportster FaxModems must be programmed.

Question:  What are the key sequences to remote connect to a character generator?
Answer: To connect/dial into a character generator from a keyboard, press <A>, <T>,<D>, <T>, <the phone number> 
(dial 1 if it is long distance), then press <ENTER>.
              Note: Connection is made when the CD light on the modem comes ON.  To disconnect/hang up from the charact/hang up from the character generator, verify that the display is in RESUME Mode, then press  <+++>, wait for 5 seconds then press <A>, <T>, <H>, and finally press <ENTER>.
              Note: Disconnection is made when the CD light on the modem goes OFF.